The tensionlock can be said to be a standard feature on every backpack, including various school backpacks, hiking backpacks, etc.
It is an indispensable part of the backpack. Generally used on backpacks to tighten webbing. For example, the lower end of the strap usually uses a four-stop buckle. Since the buckle has a self-locking function, the height of the strap can be adjusted appropriately.
What are the tensionlocks on the men zip bag?
The zip bag has tension lock, also called ladder lock, three-stop buckle, four-stop buckle.
What material are the Tensionlock on the travel bag made of?
The material on the travel bag is basically Nylon or Acetal, with just a little difference in shape or self-locking system. It is one of the standard accessories on travel bag. Generally, there will be one or two such buckles on travel bag. Generally used to adjust webbing.
What are the common tensionlock on luggage and their applications?
Now we will introduce some of the most commonly used buckles for bags, which are also the most representative buckles.
1.Evil eye Tensionlock
It can be seen that there are two holes at the lower end of this buckle, which is where its name comes from. This kind of buckle has extremely strong pulling force, high elasticity angle and enlarged gap, making it convenient to use thicker webbing. The two small holes in the lower part can pass a 1/8-inch rope, and can be used with a rope sheath when wearing gloves.
This kind of buckle is widely used to connect straps and flying bags. Some bags also have this kind of buckle on their side straps.
2.Duckbill Tensionlock
The origin of the duckbill button’s name is also related to its appearance. The finger-pressing part of the head of this kind of buckle looks like a duck’s bill. This design makes it easy to loosen the webbing with your thumb.
This buckle has teeth and a strong structure that can bear heavy loads and prevent the webbing from slipping from the buckle. Similarly, in order to facilitate use when wearing gloves, the duckbill buckle is also designed with this kind of stop buckle with holes.
Many bags, especially casual bags, use duckbill buckles. I personally think this is the most widely used buckle among casual bags.
3. Standard Tensionlock
Just by listening to the name, you can tell that this is the most basic and standard buckle. The buckle pictured on the left is said to be able to withstand a weight of 200 pounds. Amazing, right? The tooth pattern on the middle block can effectively prevent the webbing from slipping.
The head ends of standard buckles are generally flat, which is the biggest difference in appearance from duckbill buckles. The buckle on the left is generally only used to adjust the length of the webbing.
4. Mojave Tensionlock
Mohabi is supposed to be a self-locking technology. The buckles are also Mohabi. The self-locking ability of this buckle is very strong. The picture on the left is a standard Mojabi block. Its appearance is similar to a standard buckle. The Mojave buckle has a certain curvature, and each block is relatively thick. The comprehensive high elasticity design makes the release angle of the webbing better than other similar products.
To make it easier to use when wearing gloves, Mojave buckles are also available with holes on the head. In addition, Mohabi buckles also have this replaceable buckle. This kind of buckle can be easily buckled to the webbing for easy installation, repair and replacement.
A good plastic buckle can have a certain strength. Beautiful appearance. The beautiful appearance mentioned here means that there are no plastic fragments left on the entire buckle when it is molded.
In addition to the above introduction, are there any other aspects worth learning?
We can learn from below parts.
1. From the mold aspect
In fact, in addition to the material itself, a good stopper also has very high requirements for the mold. Simply put, using an injection mold with a good heat capacity to produce plastic parts will be much better than ordinary ones. Moreover, the printed product is smoother and does not have too many plastic burrs. And it can be clearly seen by hand and vision.
2. In terms of weight
Generally, when we judge the cost, we will also take the weight into consideration. Those with the same appearance will be more expensive and stronger at the same time.
3. From the aspect of materials
Good quality will use new materials, while some businesses, in order to pursue profits, will use recycled materials (previously used materials are crushed and added before use). In this way, the appearance is not much different, but the feel is obviously different.
In addition to these accessories, we are also very particular about the workmanship of our bags. Especially the additional reinforcement at the tension point, the quality of the stitching, the density of the stitching and other details. This comprehensively ensures our quality.
It turns out that a small buckle also has so much knowledge. The accessories on the backpacks we make are all high-quality products to ensure the service life of the product. Because each of our products undergoes strict sample testing before mass production. Moreover, problems discovered during the proofing process will be avoided and eliminated in batches.
